LZ-160-PIX5Board
Light line study — indicative colour output
RGB and pixel
LZ-160-PIX5
Low-density 5V pixel board for props and wearables.
- LEDs / m
- 160
- Voltage
- 5V
- Power
- 13 W/m
- PCB
- 5 mm
- CRI
- Not applicable
- Cut
- 12.5 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-160-PIX5 |
| Series | RGB and pixel |
| Form | Board |
| LEDs per metre | 160 |
| Voltage | 5V |
| PCB width | 5 mm |
| Cut interval | 12.5 mm |
| Power | 13 W/m |
| CRI | Not applicable |
| Colour | RGB + IC |
| Control IC | WS2811 |
| Feed | 0.5 m board |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- RGB, RGBW and RGBCW reels for static colour mixing, plus addressable versions on WS2811, WS2814 and WS2805 drivers
- White channels stay at Ra > 90 on the RGBW and RGBCW layouts.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-160-PIX5? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-160-PIX513 W/mRequest a quote