LZ-288-ACReel
Light line study — indicative colour output
High voltage AC
LZ-288-AC
288 per metre with an 83.33 mm cut for long ceiling runs.
- LEDs / m
- 288
- Voltage
- AC 220V
- Power
- 10 W/m
- PCB
- 8 mm
- CRI
- Ra > 80
- Cut
- 83.33 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-288-AC |
| Series | High voltage AC |
| Form | Reel |
| LEDs per metre | 288 |
| Voltage | AC 220V |
| PCB width | 8 mm |
| Cut interval | 83.33 mm |
| Power | 10 W/m |
| CRI | Ra > 80 |
| Colour | 2700K / 3000K / 4000K / 6000K |
| Feed | 50 m reel, no driver |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- AC 220V and AC 110–220V COB reels at 240 and 288 LEDs per metre
- Mains voltage goes straight to the strip, so the run needs no remote driver — with a longer cut interval and Ra > 80.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-288-AC? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-288-AC10 W/mRequest a quote