LZ-300-BCReel
Light line study — indicative colour output
Single colour
LZ-300-BC
Exposed copper pads for direct soldering where a connector is not wanted.
- LEDs / m
- 300
- Voltage
- 12V
- Power
- 8 W/m
- PCB
- 6.5 mm
- CRI
- Ra > 80
- Cut
- Any cut interval
Specification
| Field | Value |
|---|---|
| Model | LZ-300-BC |
| Series | Single colour |
| Form | Reel |
| LEDs per metre | 300 |
| Voltage | 12V |
| PCB width | 6.5 mm |
| Cut interval | Any cut interval |
| Power | 8 W/m |
| CRI | Ra > 80 |
| Colour | 2700K / 3000K / 4000K / 6000K |
| Feed | 5 m reel |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- Reels and boards from 320 to 1600 LEDs per metre on 3 mm to 30 mm PCB, with Ra > 90 on the standard white range
- Long single-feed options remove the booster on 10 m, 15 m and 20 m runs.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-300-BC? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-300-BC8 W/mRequest a quote