LZ-528-RReel
Light line study — indicative colour output
Single colour
LZ-528-R
Higher density for tight cove runs where dot-free output matters.
- LEDs / m
- 528
- Voltage
- 12V / 24V
- Power
- 14 W/m
- PCB
- 10 mm
- CRI
- Ra > 90
- Cut
- 22.73 mm / 45.45 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-528-R |
| Series | Single colour |
| Form | Reel |
| LEDs per metre | 528 |
| Voltage | 12V / 24V |
| PCB width | 10 mm |
| Cut interval | 22.73 mm / 45.45 mm |
| Power | 14 W/m |
| CRI | Ra > 90 |
| Colour | 2700K / 3000K / 4000K / 6000K |
| Feed | 5 m reel |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- Reels and boards from 320 to 1600 LEDs per metre on 3 mm to 30 mm PCB, with Ra > 90 on the standard white range
- Long single-feed options remove the booster on 10 m, 15 m and 20 m runs.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-528-R? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-528-R14 W/mRequest a quote