LZ-576-DFLReel
Light line study — indicative colour output
Colour light
LZ-576-DFL
Two channels chasing in sequence for a two-tone wave.
- LEDs / m
- 576
- Voltage
- 12V / 24V
- Power
- 6 + 6 W/m / 10 + 10 W/m
- PCB
- 10 mm
- CRI
- Not applicable
- Cut
- 41.66 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-576-DFL |
| Series | Colour light |
| Form | Reel |
| LEDs per metre | 576 |
| Voltage | 12V / 24V |
| PCB width | 10 mm |
| Cut interval | 41.66 mm |
| Power | 6 + 6 W/m / 10 + 10 W/m |
| CRI | Not applicable |
| Colour | 2700K – 6500K |
| Feed | 5 m reel |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- Single-wavelength COB with stated peak and tolerance — red 620 nm, green 540 nm, blue 455 nm, ice blue 484 nm, yellow 588 nm, violet 380 nm and pink 610 nm, all within ± 5 nm.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-576-DFL? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-576-DFL6 + 6 W/m / 10 + 10 W/mRequest a quote