LZ-600-CCT-8Board
Light line study — indicative colour output
Tunable white
LZ-600-CCT-8
Two-wire tunable board at 8 mm, cut every 20 mm.
- LEDs / m
- 600
- Voltage
- 24V
- Power
- 7 + 7 W/m
- PCB
- 8 mm
- CRI
- Ra > 90
- Cut
- 20 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-600-CCT-8 |
| Series | Tunable white |
| Form | Board |
| LEDs per metre | 600 |
| Voltage | 24V |
| PCB width | 8 mm |
| Cut interval | 20 mm |
| Power | 7 + 7 W/m |
| CRI | Ra > 90 |
| Colour | 2700K – 6500K |
| Feed | Board, two-wire control |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- Dual-white COB on 5 mm to 10 mm PCB
- Two-wire layouts mix warm and cool on one pair of conductors, three-wire layouts keep the channels separate for controllers that need independent dimming.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-600-CCT-8? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-600-CCT-87 + 7 W/mRequest a quote