LZ-608-CCT3-10Board
Light line study — indicative colour output
Tunable white
LZ-608-CCT3-10
Three-wire tunable board on 10 mm with a heavier copper layer for longer runs.
- LEDs / m
- 608
- Voltage
- 12V / 24V
- Power
- 7 + 7 W/m
- PCB
- 10 mm
- CRI
- Ra > 90
- Cut
- 26.31 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-608-CCT3-10 |
| Series | Tunable white |
| Form | Board |
| LEDs per metre | 608 |
| Voltage | 12V / 24V |
| PCB width | 10 mm |
| Cut interval | 26.31 mm |
| Power | 7 + 7 W/m |
| CRI | Ra > 90 |
| Colour | 2700K – 6500K |
| Feed | Board, three-wire control |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- Dual-white COB on 5 mm to 10 mm PCB
- Two-wire layouts mix warm and cool on one pair of conductors, three-wire layouts keep the channels separate for controllers that need independent dimming.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-608-CCT3-10? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-608-CCT3-107 + 7 W/mRequest a quote