LZ-840-RGBCW-P10Reel
Light line study — indicative colour output
RGB and pixel
LZ-840-RGBCW-P10
The 840 RGBCW reel on a 10 mm board for profiles that cannot take 15 mm.
- LEDs / m
- 840
- Voltage
- 24V
- Power
- 23 W/m
- PCB
- 10 mm
- CRI
- Not applicable
- Cut
- 71.43 mm
Specification
| Field | Value |
|---|---|
| Model | LZ-840-RGBCW-P10 |
| Series | RGB and pixel |
| Form | Reel |
| LEDs per metre | 840 |
| Voltage | 24V |
| PCB width | 10 mm |
| Cut interval | 71.43 mm |
| Power | 23 W/m |
| CRI | Not applicable |
| Colour | RGBCW 3000K – 6000K |
| Control IC | JD36703A |
| Feed | 5 m reel, addressable |
Values follow the model sheet for this layout. Confirm the sheet with the order if the run is cut to a fixed length.
Series capability
- RGB, RGBW and RGBCW reels for static colour mixing, plus addressable versions on WS2811, WS2814 and WS2805 drivers
- White channels stay at Ra > 90 on the RGBW and RGBCW layouts.
Power and installation
- Allow for driver headroom above the calculated load, and keep the driver accessible.
- In a closed profile, check the wattage against the extrusion before choosing the density.
- Past the single-feed length, feed from both ends or move up to the 48V board.
- Cut only on the marked interval — except on the any-cut board, which is cut between chips.
Quoting LZ-840-RGBCW-P10? Send the length, quantity and destination — we reply with the model sheet and a price.
Request a quoteLZ-840-RGBCW-P1023 W/mRequest a quote